MultitrackStudio User Forum

Hello,

I’m having an issue with recording in that I can’t get a signal to record to MTS while using an Audiobox USB interface.

I’m running Windows 10 on a Toshiba laptop. MTS Pro latest version.

When I use the on-board mic on the laptop I get a signal but not when I plug the Audiobox into the laptop.

Is there something I should have done either within MTS itself or on my computer so MTS can communicate with the Audiobox?

I am plugged into the Audiobox from the direct out on my amp. And then I have the Audiobox plugged in via a USB cable to the laptop. And the correct channel is turned up on the Audiobox.

Thanks

Hope this helps

I use a m-track which is about the same as the audiobox

with multitrack open > Studio > Devices > (you can choose your "audio driver type" - I'm using ASIO) >Select Devices and then look for your device it will probably say audiobox or presonus. Also if you are using midi you can set your midi in and out here. If this doesn't work wait for a reply from Geils. He's usually pretty quick

Thanks. I'll try that.

Unfortunately that didn't work.

I did get a warning though. It reads:

"The selected audio/MIDI devices cannot play back or record these tracks."

So it does have something to do with enabling the correct devices. I thought I'd selected the correct ones but it still doesn't work.