Effects Help

Discuss working with MultitrackStudio.
Post Reply
Rupert
Posts: 16
Joined: Wed Mar 02, 2016 10:14 pm

Effects Help

Post by Rupert »

Wondering if someone can briefly educate me on how to use the effects, specifically in this case, reverb.

Quite honestly I don't know how to do it.

Do you apply the effect as you're recording a track or do you apply it after the track is recorded?

And how do you even access the effects to utilize them?

Using MTS Pro w/Windows 10 64-bit.

Thanks
sinbad
Posts: 594
Joined: Mon Jan 30, 2006 9:01 pm

Re: Effects Help

Post by sinbad »

Check the description of Effects in the Help file first to see how they work. When you are recording it helps to select Monitoring (see help file) and then arm the track but don't start recording. Check all your effects by playing or singing, and then start the track.
You can also apply effects after you have recorded, and if three aren't enough you can pack some more into a Multi-effect slot.

All this is covered in the help file :mrgreen:
Rupert
Posts: 16
Joined: Wed Mar 02, 2016 10:14 pm

Re: Effects Help

Post by Rupert »

Thanks for the help.

I have looked at the 'Help' section and I must be missing something because while I can see descriptions of what the effects are and do, I don't see anything explaining how to actually to put them in use.

I'll look again though.

Thanks again.
sinbad
Posts: 594
Joined: Mon Jan 30, 2006 9:01 pm

Re: Effects Help

Post by sinbad »

Rupert
Posts: 16
Joined: Wed Mar 02, 2016 10:14 pm

Re: Effects Help

Post by Rupert »

Sinbad,

I was finally able to figure out what I was doing wrong.

Thanks for your patience and help.
Post Reply