I'm trying to record music on the computer for the first time and am having some trouble getting set up. Everything seems to be ok, but I can't hear any sound when I try to record.
Could I get some suggestions on what to look for so I can correct whatever mistake I have made?
I have a Yamaha keyboard with one midi in/out connection. I purchased an M-Audio Midisport Uno 1x1 and connected it from my keyboard to a USB port on my computer.
What do I need to do now to hear the sound?
Thanks for your help.
Diane
New user could use some help
-
- Posts: 2
- Joined: Wed May 21, 2008 10:44 pm
Welcome To M.T.S.
It is of the utmost importance to read S L O W L Y , when it comes to all things MIDI. Step by step and be prepared to research a little, within MTS and Yamaha. Both have set precedence when it comes to simplifying! It sounds like you have researched quite a bit already! Pay close attention perhaps to MIDI/ Monitor and Input Select. Read, Understand and Be Patient! You'll Get it! Happy Recording! PS . . In some instances, you will not hear live playback unless the channel is set to RECORD and the recording ( TRANSPORT BAR ) is actually running! JOhnny
-
- Posts: 3
- Joined: Thu Oct 30, 2008 1:33 am
I've checked everything I can see. I have no idea what is causing this problem. Can you give me an idea of how the sound is heard when you use this program? I mean, since I have hooked my keyboard into the computer using a USB port, should I be all set to hear the music as I record and playback or do I need to do something else directly into the sound card? This is for a midi recording not an audio...does that make a difference?
-
- Posts: 3
- Joined: Thu Oct 30, 2008 1:33 am