Hi,
I have just purchased Multi Track Studio Pro. It seems wonderfully simple to get started but for one problem. I use a Line 6 Tone Port UX2 as my input device through a USB interface for simultaneous voice and guitar. Having set up the Tone Port as my input and output device in Multi Track, I seem only able to pick up the guitar input and not the microphone. What am I missing/doing wrong? The Tone Port seems to work fine otherwise.
Thanks for any help you are able to offer.
Line 6 Tone Port UX2
-
- Posts: 44
- Joined: Wed Oct 27, 2004 5:34 pm
Hi
I think I know what your problem is.
I had the same one long time ago if it's the same.
But I'll give it a shot.
When your at the multitrackstudio screen and your inputs
are mix L, mix R ect.. or something else
If you are using mic R, L then below it
put analog R, L.
you gotta click and drag it to it's spot.
Or its
Mic R (mic)
Mic L (mic)
Analog R (guitar)
Analog L (guitar)
Ect..
I think its the one's you use the
most is priority.
You might have to mess around with your sound card mixer too.
then I think you'll be able to record different inputs at once..
Marlon
I had the same one long time ago if it's the same.
But I'll give it a shot.
When your at the multitrackstudio screen and your inputs
are mix L, mix R ect.. or something else
If you are using mic R, L then below it
put analog R, L.
you gotta click and drag it to it's spot.
Or its
Mic R (mic)
Mic L (mic)
Analog R (guitar)
Analog L (guitar)
Ect..
I think its the one's you use the
most is priority.
You might have to mess around with your sound card mixer too.
then I think you'll be able to record different inputs at once..
Marlon