MultitrackStudio User Forum

Wondering if someone can briefly educate me on how to use the effects, specifically in this case, reverb.

Quite honestly I don't know how to do it.

Do you apply the effect as you're recording a track or do you apply it after the track is recorded?

And how do you even access the effects to utilize them?

Using MTS Pro w/Windows 10 64-bit.

Thanks

Check the description of Effects in the Help file first to see how they work. When you are recording it helps to select Monitoring (see help file) and then arm the track but don't start recording. Check all your effects by playing or singing, and then start the track.
You can also apply effects after you have recorded, and if three aren't enough you can pack some more into a Multi-effect slot.

All this is covered in the help file

Thanks for the help.

I have looked at the 'Help' section and I must be missing something because while I can see descriptions of what the effects are and do, I don't see anything explaining how to actually to put them in use.

I'll look again though.

Thanks again.

There are literally thousands of youtube videos and websites covering the art of recording in the home studio, here are just a few to keepyou busy for a while.

https://www.youtube.com/playlist?list=P ... kxK83r9PpZ
https://www.producelikeapro.com/free-stuff/

https://www.recordingrevolution.com
https://www.youtube.com/channel/UCjRzsi ... HV4-2LKBtg
http://www.cambridge-mt.com/ms-intro.htm
http://www.homestudiocorner.com
http://www.soundonsound.com/techniques/ ... -made-easy

Just google for more if you need it.

Sinbad,

I was finally able to figure out what I was doing wrong.

Thanks for your patience and help.