Beh X18, 8cha via USB to Win PC running MTS not working

Discuss working with MultitrackStudio.
Post Reply
tkansora
Posts: 5
Joined: Thu Jun 07, 2018 9:52 pm

Beh X18, 8cha via USB to Win PC running MTS not working

Post by tkansora »

Hi,

I'm having a problem getting audio into my PC running Multitrack Studio Pro.

I have my Behringer X18 sending inputs 1-8 directly to the USB send. I've connected my Mac and was able to control the mixer via Xair and recorded the 8 tracks using Multitrack Studio Pro. No problem, all worked as expected.

I'm trying to do the same setup to my Windows Laptop. I can control the mixer with the windows XAir. I can see a usb connection from the mixer to the pc, but I can not access the 8 tracks of USB audio. The only thing I can access in MTS is the PC's internal mic.

When I go to the sound control panel I see
Line in 1/2
Line in 3/4
Line in 5/6
Line in 7/8

Here's a link to a picture of the window
https://www.dropbox.com/s/6bg33r0puegut ... 3.jpg?dl=0

What am I missing or doing wrong?

I am running MTS Pro, so I should have access to multiple tracks.
I've also downloaded and installed the Behringer USB driver

Thanks!
Support
Posts: 1717
Joined: Fri Aug 27, 2004 2:17 pm

Re: Beh X18, 8cha via USB to Win PC running MTS not working

Post by Support »

You need to use the ASIO driver type (in the Studio menu's Devices window).


Giel Bremmers
tkansora
Posts: 5
Joined: Thu Jun 07, 2018 9:52 pm

Re: Beh X18, 8cha via USB to Win PC running MTS not working

Post by tkansora »

Thank you!!

I knew it had to an easy fix. That did it.

Thanks!
Post Reply