Broke my MTS asio4all
Posted: Sat Aug 24, 2019 12:17 am
Hi Peeps
Been buying your stuff forever and today I realized you have a forum LOL. Ok, I broke something an I cant figure it out. So Im going to go nice and slow. (ps: Just bought the Pro 2 days ago, but either way Ive always had everything working)
First let me explain how I have gear attached. I have my guitar. Then the chord goes to a little plastic box from Line 6. It has capabilities to connect by USB, or Line in. Since Ive been using USB for over 10 years, I dont use the line in, just USB. So in behind the computer to USB in.
Second, I use the line 6 software. This has chorus, flanger, reverb, this is the heart and soul of my sound (its like my guitar amp with attitude) . Dont need MTS to work this. I always have this on auto settings. MTS did work with it fine. This part was not touched. I believe it uses the adio4all as well.
Third. MTS its self. I will give you the set up that DOES work. Lets go Studio>>Devices. Ok, now this is where I get confused. (this is the part thats broken LOL) So I'll give the settings
Audio Driver Type: Windows XP (NOT RECOMMENDED)
Audio In Device: Digital Audio Interface (Line 6)
MIDI In Devices: None
Audio Out Device (High Latency): Speakers (Realtek High Definition)
Audio Out Device (Low Latency): Primary Sound Driver [Latency 3072]samples
MIDI Out Devices: None
Those setting DO work, guitar can record, the track can play ALL at the same time. So Im going to go over how the recording process goes for me:
Track 1: energy 160 beats per minute guitar backtrack (this has bass, drums, rhythm guitar all in one track)
Track 2: Lead 1 solo (this is my guitar track the I record too)
Some of my work, has multiple tracks, but I made is simple. I can click record on track 2, while playing track 1. When Im finished, I can go back to beginning, and play both tracks, and it works. Problem is it sounds like sh* (*looks at forum rules) shtupid music LOL.
I think default is "Windows" Driver type. Cant remember, as I broke this LOL. I will give you my possible options for that setting.
Audio Driver Type: Windows
Audio In Device: None, Default, Digital Audio Interface (Line 6 TonePort GX)
Midi In Devices: None, Line 6 TonePort GX (same for a 4 columns)
Audio Out Device: None, Default, Speakers (RealTek High Definition Audio). [latency 12]
Midi Out Devices: None, Default, Microsoft GS Wavetable Synth, Line 6 TonePort GX
With the above setting, I can either use Line 6 alone, or MTS alone. They wont work together. Now I did press record, on MTS, on track 2, strum the guitar, and see the needle move (not sure if right term) this means MTS can hear it, just not me.
I have an Asio4All driver type as well. Not sure what to press with these either. I'll show those options.
Audio Driver Type: ASIO
MIDI In Devices: None, Line 6 TonePort GX (same for all 4 columns)
Audio Device: None, ASIO TonePort GX, ASIO4ALL v2,
MIDI Out Devices: None, Default, Microsoft GS Wavetable Synth, Line 6 TonePort GX
Personally I dont know what a MIDI devices is. The only input I use is a USB as stated above. If it is the same thing, please let me know.
And finally, all my options for the ASIO4ALL settings Im aloud.
Under WDM Device List I Have in order:
Realtek High Definition Audio
Realtek HD Audio Stereo input
Realtek HD Audio output
Realtek HD Audio Mic input
Line 6 TonePort GX
Out: 2x 44.1-48k Hz, 24Bits
In: 2x 44.1-48k Hz, 24 Bits
ASIO Buffer Size = 512 Samples
I think that might be all that matters there as Ive never really touched this thing. I dont know what to turn on or off on this. Im believing I have all the settings, let me know, what else is needed. I also added my YT video I just uploaded using MTS last week to show it does work:
https://www.youtube.com/watch?v=NgFMY1lYhCU
Been buying your stuff forever and today I realized you have a forum LOL. Ok, I broke something an I cant figure it out. So Im going to go nice and slow. (ps: Just bought the Pro 2 days ago, but either way Ive always had everything working)
First let me explain how I have gear attached. I have my guitar. Then the chord goes to a little plastic box from Line 6. It has capabilities to connect by USB, or Line in. Since Ive been using USB for over 10 years, I dont use the line in, just USB. So in behind the computer to USB in.
Second, I use the line 6 software. This has chorus, flanger, reverb, this is the heart and soul of my sound (its like my guitar amp with attitude) . Dont need MTS to work this. I always have this on auto settings. MTS did work with it fine. This part was not touched. I believe it uses the adio4all as well.
Third. MTS its self. I will give you the set up that DOES work. Lets go Studio>>Devices. Ok, now this is where I get confused. (this is the part thats broken LOL) So I'll give the settings
Audio Driver Type: Windows XP (NOT RECOMMENDED)
Audio In Device: Digital Audio Interface (Line 6)
MIDI In Devices: None
Audio Out Device (High Latency): Speakers (Realtek High Definition)
Audio Out Device (Low Latency): Primary Sound Driver [Latency 3072]samples
MIDI Out Devices: None
Those setting DO work, guitar can record, the track can play ALL at the same time. So Im going to go over how the recording process goes for me:
Track 1: energy 160 beats per minute guitar backtrack (this has bass, drums, rhythm guitar all in one track)
Track 2: Lead 1 solo (this is my guitar track the I record too)
Some of my work, has multiple tracks, but I made is simple. I can click record on track 2, while playing track 1. When Im finished, I can go back to beginning, and play both tracks, and it works. Problem is it sounds like sh* (*looks at forum rules) shtupid music LOL.
I think default is "Windows" Driver type. Cant remember, as I broke this LOL. I will give you my possible options for that setting.
Audio Driver Type: Windows
Audio In Device: None, Default, Digital Audio Interface (Line 6 TonePort GX)
Midi In Devices: None, Line 6 TonePort GX (same for a 4 columns)
Audio Out Device: None, Default, Speakers (RealTek High Definition Audio). [latency 12]
Midi Out Devices: None, Default, Microsoft GS Wavetable Synth, Line 6 TonePort GX
With the above setting, I can either use Line 6 alone, or MTS alone. They wont work together. Now I did press record, on MTS, on track 2, strum the guitar, and see the needle move (not sure if right term) this means MTS can hear it, just not me.
I have an Asio4All driver type as well. Not sure what to press with these either. I'll show those options.
Audio Driver Type: ASIO
MIDI In Devices: None, Line 6 TonePort GX (same for all 4 columns)
Audio Device: None, ASIO TonePort GX, ASIO4ALL v2,
MIDI Out Devices: None, Default, Microsoft GS Wavetable Synth, Line 6 TonePort GX
Personally I dont know what a MIDI devices is. The only input I use is a USB as stated above. If it is the same thing, please let me know.
And finally, all my options for the ASIO4ALL settings Im aloud.
Under WDM Device List I Have in order:
Realtek High Definition Audio
Realtek HD Audio Stereo input
Realtek HD Audio output
Realtek HD Audio Mic input
Line 6 TonePort GX
Out: 2x 44.1-48k Hz, 24Bits
In: 2x 44.1-48k Hz, 24 Bits
ASIO Buffer Size = 512 Samples
I think that might be all that matters there as Ive never really touched this thing. I dont know what to turn on or off on this. Im believing I have all the settings, let me know, what else is needed. I also added my YT video I just uploaded using MTS last week to show it does work:
https://www.youtube.com/watch?v=NgFMY1lYhCU