Great update
-
- Posts: 9
- Joined: Mon Jan 12, 2015 10:09 am
Great update
Thanks again for The great update. This app continues to grow in a very Pro direction. One question. Will it be possible in some future update to have each track be assigned to a specific hardware output. In addition could there be some kind of bussing system where tracks can be bussed out and returned back for recording the new hardware processed track. Cheers.~~_/)~~~*
Re: Great update
Things like that are under consideration.
Out of curiosity: how many outputs does your audio device have?
Giel Bremmers
Out of curiosity: how many outputs does your audio device have?
Giel Bremmers
-
- Posts: 9
- Joined: Mon Jan 12, 2015 10:09 am
Re: Great update
I have 4 in 6 out but if you include the optical ADAT port than I have 10 inputs and 14 outputs. MTS already recognizes all my inputs and it sees my outputs but I can only chose a global output for all the channels in Devices. My interface is an Audient iD22 and I connect an additional 2 channels of my Audient Mico via ADAT optical into the iD22 giving me 4 Audient classA desscrit transistor analogSupport wrote:Things like that are under consideration.
Out of curiosity: how many outputs does your audio device have?
Giel Bremmers
inputs at once. As I said MTS records all these inputs at once already. Hope that helps. Cheers and thank you Giel.
Re: Great update
Indeed some great new features
FYI - Altering the midi pitch bend range only seems to work for MTS instruments. If I load a soundfont it uses the old pre-1.8 range.
FYI - Altering the midi pitch bend range only seems to work for MTS instruments. If I load a soundfont it uses the old pre-1.8 range.
Re: Great update
That's supposed to work, but it doesn't indeed. I'll look into that.dinoroo wrote:FYI - Altering the midi pitch bend range only seems to work for MTS instruments. If I load a soundfont it uses the old pre-1.8 range.
Edit: found it. It will be fixed in the next release.
Giel Bremmers
Re: Great update
Thanks. That's a lot of unused outputs indeed!A.I.R.Studio wrote:I have 4 in 6 out but if you include the optical ADAT port than I have 10 inputs and 14 outputs
Giel Bremmers