Hey sinbad - Got a Mid-Hi Gain Chain preset for you to try. It's not the same as the first one I was talking about, but I think it's just as good and uses MTS effects and free plugins/IR's. I should mention this is for PC and Windows 7 64bit is what I'm using. I'm sure you know the drill for this stuff, but I'll take it step-by-step for the benefit of those who may not.
First, you'll need to download a free IR pack from Ownhammer...
http://www.ownhammer.com/free/v4-demo/ It's a nice package based on a Celestion Vintage 30.
It contains a bunch of files and folders, but this folder - Ownhammer Mesa V60\OwnHammer\Wav-200ms\44100-Hz\412 MES-ST\V60\Mixes\Mpt - contains what I used. You'll want to put this folder in your MTS IR Directory - mine's at C:\Program Files\MtStudio\IR\
You'll also need the free TS-999 v1.5.2 and TSE 808 v2.0 VST plugins.
Next, here's how the Chain goes. (I'll provide text below to save the preset as a MultiEffect)
TS-999 v1.5.2 - Default, plus switch FAT & ASYM on
into
TSE 808 v2.0 - Default
into
MTS Guitar Amp > MTS Chorus > MTS Stereo Effect > MTS Reverb
Copy and Paste the text below, (between the lines), in Notepad and save as "All Files" with the name -
MTS Mid-Hi Gain Guitar Chain.Effect_Multieffect
Save it in your MTS Presets folder. Mine is located at... C:\Users\John\AppData\Roaming\MtStudio\Presets
--------------------------------------------------------------
[waveeffect]
name=multieffect
bypass=0
[waveeffect effect 1]
name=vst_plugin
bypass=0
filename=TS-999.dll
uniqueid=1414740281
pars=¡$™$¡(‘(¡$Ÿ¡$‘0¡$Ÿ"!!@¡$$¡-Ÿ!
[waveeffect effect 2]
name=vst_plugin
bypass=0
filename=TSE_808_2.0_x64.dll
uniqueid=2021143603
pars=Zš ˜$¡(‘(¡$Ÿ¡)Ÿ"!!!!
[waveeffect effect 3]
name=guitaramp
bypass=0
amptype=2
micpos=0.5
bright=1
ukchannel=1
bottom=0
hot=1
gain=1
bass=0.199999999291238
mid=0.33
treble=0.78
cut=0.133417236470971
volume=1
inputlevel=4
outputlevel=0.641712948781452
impulsfile=C:\Program Files\MtStudio\IR\Ownhammer Mesa V60\OwnHammer\Wav-200ms\44100-Hz\412 MES-ST\V60\Mixes\Mpt\OH 412 MES-ST V60 SP2-04.wav
irdir=C:\Program Files\MtStudio\IR\
lastpreset=Mid to Hi Gain Solo
[waveeffect effect 3 stompbox0]
name=noisegate
threshold=-57.5
reduction=44.15
[waveeffect effect 3 stompbox1]
name=booster
gain=2
tone=-2.4
[waveeffect effect 4]
name=chorus
bypass=0
speed=0.1
depth=0.36
stereo=1
lastpreset=Mild Chorus
delay=0.0126
mix=0.22
white=0
[waveeffect effect 5]
name=stereoeffect
bypass=0
lastpreset=Twin Delay
[waveeffect effect 5 left]
volume=1
pan=15
[waveeffect effect 5 left effect 1]
name=echo
bypass=0
delay=0.305409930601395
feedback=0
locut=201.104735956339
hicut=4892.66969781578
tapesound=1
mix2=0.15
[waveeffect effect 5 right]
volume=1
pan=85
[waveeffect effect 5 right effect 1]
name=echo
bypass=0
delay=0.497010375926323
feedback=0
locut=201.104735956339
hicut=4892.66969781578
tapesound=1
mix2=0.15
[waveeffect effect 6]
name=reverb
bypass=0
program=room_large
predelay=0.034
reverbtime=1.985
bassmult=0.2
bassmultfrequency=50
hicut=4087.74784223193
width=5
spindepth=0.7
mix=0.25
lastpreset=Guitar Hall
---------------------------------------------------------------
Some usage notes...
If your MTS IR location is different than mine, you'll have to select an IR from within the Guitar Amp and re-Save.
I use this preset to play 'live' with the "Monitor" button on. I just setup a MTS Multi Effect in a track and choose the 'MTS Mid-Hi Gain Guitar Chain' preset. As is, it's good for slower solo's, but can be adjusted to suit a variety of needs. You may need to adjust the 'Noise Gate' or Volume/Tone controls for your particular setup.
Use the "Gain" control on the "Booster" section in the MTS Guitar Amp for more or less drive/sustain/distortion.
Try different IRs to best match your guitar/pickups. Usually, the lower the IR #, the brighter the sound and vice versa.
Not certain the TS-999 and TSE 808 presets above will save/import correctly. You may have to import them manually and save again.
I think that about covers it. Any problems/questions, let me know.