MIDI effect multi-channel ouput
Posted: Mon May 31, 2021 8:02 am
DigiKeys lets you drive each of its 16 internal instruments by sending it MIDI on any of those 16 channels. I would like to drive DigiKeys in MTS using the piano roll but I cannot see a way of setting the channel on a per-note basis in the controller section. To try and work around this I added Atom 2 in the MIDI effect slot and added some notes to a few different channels in its piano roll. This same MIDI drives DigiKeys as expected in AUM/Cubasis but MTS seems to do some processing on the MIDI between the MIDI effect and the receiving plugin (possibly changing the channel of the notes to the track channel?). Would it be possible to remove any processing so that the raw MIDI is sent as-is between the effect and receiving plugin?
This is also an issue with multi-channel MPE. I recorded some MPE MIDI into Atom 2 routed to GeoShred Flute using Velocity Keyboard as the input with its “MPE Guitar” preset, which uses:
“ MPE-4: Legato support, limited to one note per string or keyboard. Multi-channel MIDI with one note per string or one note per keyboard. Use this if you need legato transitions between notes.”
This MIDI sounds correct when played back from Atom 2 in AUM and Cubasis but the same MIDI when loaded into Atom 2 as an MTS MIDI effect does not sound correct.
This is also an issue with multi-channel MPE. I recorded some MPE MIDI into Atom 2 routed to GeoShred Flute using Velocity Keyboard as the input with its “MPE Guitar” preset, which uses:
“ MPE-4: Legato support, limited to one note per string or keyboard. Multi-channel MIDI with one note per string or one note per keyboard. Use this if you need legato transitions between notes.”
This MIDI sounds correct when played back from Atom 2 in AUM and Cubasis but the same MIDI when loaded into Atom 2 as an MTS MIDI effect does not sound correct.