bringing effects in and out

Discuss working with MultitrackStudio.
Post Reply
valiant
Posts: 84
Joined: Thu Dec 04, 2008 5:00 pm
Location: England

bringing effects in and out

Post by valiant » Fri Feb 05, 2021 11:51 am

If I'm playing guitar on stage and I want an extra effect (like fuzz or echo) in part of a song, I can step forwards and tap a footswitch for the appropriate pedal for the desired part, then tap the switch to take it off again. How do I do this in MTS?

The only way I can see to do this is to duplicate my guitar track, put the extra effect on all of it, then play this simultaneously with the original but using the fader control on each track so that I start with the original only (ie , effected track faded out), switch to the effected track (original track faded out), then back to the original (effected track faded out). However, this uses up extra track space on the computer screen, inconvenient if you have several tracks of other instruments. And "my" solution would require a second duplicate if I had two effects I wanted to bring in out independently of each other.

Surely there's a better way to switch in effects just when I need them, without having to duplicate the track?

Support
Posts: 1473
Joined: Fri Aug 27, 2004 2:17 pm
Contact:

Re: bringing effects in and out

Post by Support » Fri Feb 05, 2021 4:24 pm

There are 3 ways to to that:

1. Put the effect in a Parallel Effect (see https://www.multitrackstudio.com/paralleleffect.php). You can automate the two Volume knobs (see https://www.multitrackstudio.com/automation.php), or you can use Automated Fader effects.

2. Put the effect in an Effect Return section, and automate the track's corresponding Effect Send knob. This only works well for effects that have a dry/wet knob (reverb, echo...), so you can add the wet signal only.

3. Select the part in the editor, click the editor's EDIT button and load the effect in the Audio Edit Control (see https://www.multitrackstudio.com/audioedit.php).


Giel Bremmers

Post Reply